Related Manuals for Sharp AR-215
Summary of Contents for Sharp AR-215
-
Page 1: Table Of Contents
MULTI ACCESS OPERATION MANUAL Page Multi-Access Introduction What is Multi-Access? Definitions of Terms Job priority order Functions and Multi-Access Jobs and Multi-Access Multi-Access Operation Procedures for Using Multi-Access Operation when an error occurs Error table Errors and operation Other operation Modes and exit trays Department control and changing modes Power save function and operation... -
Page 2: Multi-Access
Multi-Access Introduction This manual explains Multi-Access, how it operates, and how it is used. The explanations are targeted toward models that have the most features installed. For information on copy functions, fax functions, printer functions, and scanner functions, refer to the corresponding manual for each those modes. Explanations regarding scanner functions assume that the Network Scanner Expansion Kit (AR-NS2) has been installed. -
Page 3: Functions And Multi-Access
Multi-Access Second priority jobs Print jobs, fax reception jobs. Jobs processed simultaneously Scanner transmission jobs, memory transmission jobs (memory transmission jobs cannot be processed simultaneously with direct transmission jobs). 1st priority group Walkup jobs Copy jobs (including electronic sort functions) Fax scan jobs Direct transmission jobs Simultaneous processing... - Page 4 Multi-Access Modes and the display The display shows the base screen or function setting screen of the currently selected mode. During operation, or during the execution of a walkup job, the display of the corresponding mode appears. When there is no walkup job, or during the execution of a print or fax print job, the display shows "PRINTING".
- Page 5 Multi-Access Changing modes To use a mode, press the corresponding mode key. Press the mode key of the mode you wish to use. The machine changes to the selected mode and the mode light illuminates. ● The following illustration shows the model with the most features installed. ●...
-
Page 6: Jobs And Multi-Access
Multi-Access A misfeed has occurred. ● A temporary interruption of operation has occurred due to an error during a copy job (for details, ● refer to "Operation when an error occurs"). Jobs and Multi-Access Changing jobs In the case of a walkup job, you can temporarily interrupt a job that is currently being executed and perform the walkup job. - Page 7 Multi-Access Displaying the print job status menu The job type, job status, paper tray, and paper size appear in the print job status menu. The procedure for displaying the print job status menu from copy mode is explained here. Press the JOB STATUS key. ( page 5) Select "JOB OUTPUT"...
-
Page 8: Multi-Access Operation
Multi-Access Operation Procedures for Using Multi-Access 1) Interrupting a copy job Press the INTERRUPT key during a copy job. Copying stops temporarily and the job can be interrupted. Details can be found in ● the operation manual for the unit. 2) Changing to a different print job during a copy job or auto print job The procedure for changing to a print job during a copying job is explained here. - Page 9 Multi-Access Operation Stopping a print job A print job is normally stopped by changing to print mode and then changing the job to "Offline". Press the JOB STATUS key. ( page 5) Select "JOB OUTPUT" with the keys and then press the OK key.
- Page 10 Multi-Access Operation 5) Changing to an auto print job when there is no paper or the exit tray is full When one auto print job temporarily stops because there is no paper or the exit tray is full, and another job is waiting, the other job will begin after a certain time elapses. For example, if there is a print job when a fax print job stops temporarily and the status of the print ●...
-
Page 11: Operation When An Error Occurs
Operation when an error occurs Error table When an error occurs during a job, the error immediately appears in the display. The job is interrupted if the error affects the job; otherwise, the job continues. In the case of a walkup job, if the error does not affect the job, the error message appears after the job is completed. - Page 12 Operation when an error occurs Out of toner The display shows "Add toner. Can not copy or print." The mode can be changed. However, the mode cannot be changed if the toner runs out during ● a copy job. In this case, you can press the CLEAR ALL key or CLEAR key to cancel the job, and then change the mode.
- Page 13 Operation when an error occurs Full exit tray A message appears in the display prompting you to remove paper from the exit tray. The mode can be changed. However, if the exit tray became full during a copy job, the mode ●...
-
Page 14: Other Operation
Other operation Modes and exit trays Types of exit trays An optional finisher can be installed to increase the number of exit trays. Only the machine Centre tray (with offset function) ● Job separator tray ● With finisher Centre tray (with offset function) ●... -
Page 15: Power Save Function And Operation
Other operation Power save function and operation When the power is turned on and the machine is not used for a certain duration of time, the machine automatically enters power save mode. When a job occurs in power save mode, the machine returns to the state in which it can execute the job (standby). - Page 16 MULTI ACCESS SHARP CORPORATION PRINTED IN CHINA Printed on 100% post-consumer recycled paper 2003A TINSE0905QSZZ Downloaded from: http://www.usersmanualguide.com/...
- Page 17 This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...