Counter - Toshiba e-STUDIO6520C Service Handbook

2.6.5

Counter

Classific
Code
ation
251 Maintena Setting value of PM
nce counter / K
252 Maintena Current value of PM
nce counter Display/0 clearing /
K
344 Counter Count setting of tab paper
(PM)
346 Counter Count setting of large-
sized paper (PM)
347 Counter Definition setting of large
sized paper (PM)
348 Counter Count setting of thick
paper (PM)
349 Counter Count setting of OHP film
(PM)
352 Counter Count setting of large-
sized paper (Fee charging
system counter)
353 Counter Definition setting of large
sized paper (Fee charging
system counter)
375 Maintena Setting value of PM time
nce counter display/0 clearing /
K
376 Maintena Current value of PM time
nce counter / K
Note:
In this equipment, a toner image is formed on the transfer belt prior to a paper feeding.
When the feeding retry occurs and the transport timing is delayed, the toner image on the
transfer belt is cleaned off without the 2nd transfer since the paper cannot be reached for the 2nd
transfer process.
After that, the toner image formation is retried while the paper is waited.
In this case, the toner for this image formation is consumed wastefully since the toner image on
the transfer belt is already cleaned off, even though the printing is normally completed.
Therefore, note that the excessive toner will be consumed consequently when the upper limit
value of feeding retry counter is set larger or set as "0" (no limit).
The toner is also consumed wastefully when the paper misfeeding occurs. Replace the roller at
earlier timing if the paper misfeedings have occurred frequently.
e-STUDIO5520C/6520C/6530C
SELF-DIAGNOSTIC MODE
Setting mode (08)
Functi
Items
on
ALL
(black)
ALL
(black)
ALL
ALL
ALL
ALL
ALL
ALL
ALL
ALL
(black)
ALL
(black)
2 - 134
Default
<Accept
RAM
able
value>
Refer to M Sets the threshold for
displaying a message
content
<8 digits> for PM timing.
0: Not displayed
<Default>
e-STUDIO5520C
: 225,000
e-STUDIO6520C
: 250,000
e-STUDIO6530C
: 275,000
0 M Counts up when the
<8 digits> registration sensor is
ON.
08-1150-0
1 M 0: Counted as 1
<0-1> 1: Counted as 2
1 M 0: Counted as 1
<0-1> 1: Counted as 2
1 M 0: A3/LD
<0-1> 1: A3/LD/B4/LG/
FOLIO/COMP
1 M 0: Counted as 1
<0-1> 1: Counted as 2
1 M 0: Counted as 1
<0-1> 1: Counted as 2
JPN: 0 M 0: Counted as 1
OTHER: 1: Counted as 2
1 2: Counted as 1
<0-2> (Mechanical counter
is double counter)
0 M 0: A3/LD
<0-1> 1: A3/LD/B4/LG/
FOLIO/COMP
285,000 M Sets the threshold for
<8 digits> displaying a message
for PM timing.
0: Not displayed
0 M Counts the drum driving
<8 digits> time.
08-1150-3
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
Proce
Contents
dure
1
1
1
1
1
1
1
1
1
1
1