Firmware Updating With Usb Media - Toshiba e-STUDIO6520C Service Handbook

8.1

Firmware Updating with USB Media

Firmware can be updated by storing update programs and firmware data files in the USB media.
Note:
When performing the update, use the latest program.
Program necessary for updating
Update program
Update program loader
Model specific update program
Firmware type and data file name for updating
Equipment
Firmware
System ROM
Master data
PFC ROM
Engine ROM
Scanner ROM
Options
Firmware
Imaging Acceleration
Board ROM
Store the update program loader (mentusb2.o) in the root directory, and store the model specific update
program (dlFirmWare_5520C_6530C) and the data file for updating in the model specific folder.
Model specific folder name
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
Data file name
mentusb2.o
dlFirmWare_5520C_6530C
Stored
System control PC firmImage0.bin
board
(SYS board)
Hard disk hdd.bin
Paper feeding control T430FWW.xxx
board *
(PFC board)
Logic PC board T430MWW.xxx
(LGC board) *
Scanning section T430SLGWW.xxx
control PC board *
(SLG board)
Stored
Imaging Acceleration T430IWW.xxx
Board (MEP board) *
8 - 5
An error occurs at a time of the [4] + [9]
startup, unless this program is stored in
the USB media.
* Be sure to save this data file to the
root directory of the USB media.
An error occurs at a time of the [4] + [9]
startup, unless this program is stored in
the USB media.
Data file name
xxx is version.
xxx is version.
xxx is version.
Data file name
xxx is version.
5520C_6530C
Remarks
Remarks
OS data
HDD program data,
System firmware,
UI data
PFC firmware
Main firmware
Scanner firmware
Remarks
Imaging Acceleration
Board firmware
e-STUDIO5520C/6520C/6530C
FIRMWARE UPDATING
8