Pm Support Mode - Toshiba e-STUDIO6520C Service Handbook

5.4

PM Support Mode

5.4.1 General Description
This equipment has a PM support mode which enables you to confirm the use status of each part (the
number of output pages or developed pages, and drive counts) requiring periodic replacement and also
the replacement record, as well as resetting counter values efficiently. This record can be printed out in
the list print mode.
5.4.2 Operational flow
PM support mode activated
[6]+[START]+[POWER]ON
[RETURN] pressed
Main unit list displayed
[CANCEL] pressed
Clear finished
Counter clear
confirmation displayed
Counter clear performed
* The screen goes back to the main screen when the counter clear is performed or the [CANCEL]
button is pressed after moving from the main screen, while it goes back to the sub screen after
moving from the sub screen.
e-STUDIO5520C/6520C/6530C
PREVENTIVE MAINTENANCE (PM)
[2] [START]
Main unit chosen
[SUB UNIT] pressed
Main screen
[RETURN]
pressed
Main unit chosen
[RESET]
Clear screen
[CANCEL]
pressed
Sub unit chosen
[RESET] pressed
[INITIALIZE]
pressed
Fig. 5-2
5 - 6
Sub screen
Sub unit list displayed
Clear finished
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
Sub unit chosen
[DETAIL] pressed
[RETURN]
pressed
Sub unit detail screen
Sub unit detail displayed
(for developer unit)