(5)
Remove the internal cover.
(6)
Remove the cover plate.
(7)
Connect the download jig with the jig connector on the FAX board.
(8)
Press the [ON/OFF] button while simultaneously holding down the [0] and [8] buttons.
Updating starts automatically and the LED on the download jig lights.
e-STUDIO5520C/6520C/6530C
FIRMWARE UPDATING
Fig. 8-44
Fig. 8-45
Fig. 8-46
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
8 - 48