Toshiba e-STUDIO6520C Service Handbook page 370

* K8: Grounding plate
Apply 1 rice-sized grain of Floil (GE-334C) at the point that contacts with the shaft of the 2nd transfer
roller.
* K9: Paper dust cleaning brush (registration roller)
Take off the paper dust removing brush (registration roller) from the 2nd transfer unit, and then
remove the paper dust on the brush with a vacuum cleaner.
* K12: TRU waste toner auger drive gear
After the TRU waste toner box was replaced, apply 1 rice-sized grain of white grease (Molykote
EM30-L) over the teeth of the TRU waste toner auger drive gear.
e-STUDIO5520C/6520C/6530C
PREVENTIVE MAINTENANCE (PM)
Fig. 5-39
Fig. 5-40
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
5 - 38