Toshiba e-STUDIO6520C Service Handbook page 573

(5) Select the item with the digital keys.
"*" is displayed next to the selected item. Display or delete the "*" by pressing the number of the
item.
Item
1. OS Update
2. HDD SYS Update
3. PFC Firmware Update
4. Engine Main Firmware Update
5. Scanner Firmware Update
(6) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
Status display during update
OS Update...........................FROM write
HDD SYS Update ............... Copy file
PFC Firm Update ................ Flash Update
Engine Firm Update............. Flash Update
Scanner Firm Update ..........Flash Update
(7) "Update Completed." is displayed at the bottom of the LCD screen after the updating is
completed properly.
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
Remarks
Updating OS data and UI data
Updating Master data and System data
Updating PFC ROM
Updating Engine ROM
Updating Scanner ROM
Status display when update is completed
OS Update...........................Completed
HDD SYS Update ............... Completed
PFC Firm Update ................ Completed
Engine Firm Update............. Completed
Scanner Firm Update ..........Completed
Fig. 8-3
8 - 9
e-STUDIO5520C/6520C/6530C
FIRMWARE UPDATING
8