Toshiba e-STUDIO6520C Service Handbook page 328

* When wireless LAN is used, perform the setting again on the LCD panel. (only when security with a
certificate is used)
Also, upload the following certificate file with "Install Certificate for Wireless LAN" of TopAccess.
CA certificate
User certificate
[G] Reset "FUNCTION LIST FOR MAINTENANCE"
(1) Print out the "FUNCTION LIST FOR MAINTENANCE" list after the formatting.For how to print it
out, refer to P.4-16 "[B] Print out "FUNCTION LIST FOR MAINTENANCE"".
(2) While pressing [1] and [3] simultaneously, turn the power ON. (Function Mode)
(3) Compare the lists which were printed before and after the formatting to check the setting items
having the different setting values. Set the value which was set before the formatting.
(4) Turn the power OFF.
[H] Reset "FUNCTION" list
• Reset the fax function by referring to the "function list" that was printed out in
"FUNCTION" list".
(1) Press the [USER FUNCTIONS] button.
(2) Press the [ADMIN] button, enter the password, and then press the [ENTER] button.
(3) Press the [FAX] button and then the [TERMINAL ID] button to set each item.
(4) Press the [INITIAL SETUP] button to set each item.
Note:
Explain to the user (machine administrator) about the next operation and ask him/her to enter
his/her password.
e-STUDIO5520C/6520C/6530C
BACKUP FUNCTION
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
4 - 18
P.4-17 "[C] Print out