Toshiba e-STUDIO6520C Service Handbook page 206

[Procedure to key in adjustment values]
In accordance with the procedure described below, make adjustment of each adjustment item so that
the measured values obtained from test copies satisfy the specification. By pressing the [FAX] button,
immediately after starting the Adjustment Mode (05), single-sided test copying can be performed
(normal copy mode).
<Operation keys>
0 5
POWER
1
Digital keys : Key in codes.
START
Digital keys : Key in adjustment
values.
( CLEAR Use to make corrections)
Value ZZZ is stored
ENTER
replacing values YYY.
or
INTERRUPT
FAX
Test copy
START
If the test copy does not
satisfy the specified values,
return to step 1 and
repeat the adjustment
procedure.
Power OFF/ON : Exit the Adjustment Mode.
e-STUDIO5520C/6520C/6530C
ADJUSTMENT
<Display>
100% A
TEST MODE
100% XXX
TEST MODE
YYY
Current adjustment value
100% A
TEST MODE
100% A
Wait Warming Up
100% A
COPYING
Fig. 3-7
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
3 - 8
A3
Code No.
A3
Adjustment value newly keyed in.
ZZZ
(If no entering, YYY is displayed.)
A3
A3
A3