Beam Level Conversion Setting - Toshiba e-STUDIO6520C Service Handbook

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO6520C:

Table of Contents

Beam level conversion setting

A beam level for smoothing process (divided into 4) in the fax function can be set. In this setting the size

of dots is adjusted.

Item to be adjusted

While pressing [0] and [5] simultaneously, turn the power ON.

Key in a code and press the [START] button.

Key in a sub-code and press the [START] button.

Key in an adjustment value.

(To correct a value once keyed in, press the [CLEAR] button.)

Press the [ENTER] or [INTERRUPT] button to store the value. → The equipment goes back to

the ready state.

Take the POWER OFF.

Check the beam level conversion setting with the actual fax data received, if possible.

1. The setting value must increase as the beam level number (0 to 4) becomes higher. Do not

increase this order when setting the values.

2. Usually, beam level 4 / 4 is most effective on black mode.

e-STUDIO5520C/6520C/6530C

Beam level 0/4

The smaller the value is, the smaller the beam width

becomes. Therefore, the smaller dot is reproduced

Beam level 1/4

accordingly. Acceptable values: 0 to 255

Beam level 2/4

(Default: Level 0/4: 0, Level 1/4: 63, Level 2/4: 127, Level 3/

4: 191, Level 4/4: 255)

Beam level 3/4

Beam level 4/4

Show Quick Links

Table of Contents

E-studio5520c E-studio6530c