Table of Contents
Advertisement
• See Chapter 3 "Parts listing" on page 29 to determine which components are consumable, structural, or CRU
parts.
• If an action step is preceded by "(Trained technician only)," that step must be performed only by a trained
technician.
Message
System over recommended voltage for +12
V.
System over recommended voltage for +0.9
V.
System over recommended voltage for +3.3
V.
196
BladeCenter HS23 Blade ServerProblem Determination and Service Guide
Action
Informational only.
Note: If the problem remains, complete the following steps:
1. Reseat the blade server - See "Removing the blade server from the
BladeCenter unit" on page 39 and "Installing the blade server in a
BladeCenter unit" on page 39.
2. Check the function of the shared BladeCenter unit resources. See
"Solving shared BladeCenter resource problems" on page 258.
3. (Trained technician only) Replace the system-board assembly. See
"Removing the system-board assembly" on page 71 and
"Installing the system-board assembly" on page 71.
Informational only.
Note: If the problem remains, complete the following steps:
1. Reseat the blade server - See "Removing the blade server from the
BladeCenter unit" on page 39 and "Installing the blade server in a
BladeCenter unit" on page 39.
2. Check the function of the shared BladeCenter unit resources. See
"Solving shared BladeCenter resource problems" on page 258.
3. (Trained servic technician only) Replace the system-board
assembly. See "Removing the system-board assembly" on page
71 and "Installing the system-board assembly" on page 71.
Informational only.
Note: If the problem remains, complete the following steps:
1. Reseat the blade server. See "Removing the blade server from the
BladeCenter unit" on page 39 and "Installing the blade server in a
BladeCenter unit" on page 39.
2. Check the function of the shared BladeCenter unit resources. See
"Solving shared BladeCenter resource problems" on page 258.
3. (Trained technician only) Replace the system-board assembly. See
"Removing the system-board assembly" on page 71 and
"Installing the system-board assembly" on page 71.
Advertisement
Table of Contents
