Quality Menu - Lexmark MS312 User Manual

Understanding the printer menus
Use
Paper Saver Border
None
Solid

Quality menu

Use
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both directions
Toner Darkness
1–10
Enhance Fine Lines
On
Off
Gray Correction
Auto
Off
Brightness
‑6 to 6
Contrast
0–5
To
Print a border when using Paper Saver.
Note: None is the factory default setting.
To
Specify the printed output resolution in dots per inch.
Note: 600 dpi is the factory default setting.
Enable more pixels to print in clusters for clarity, in order to enhance images
horizontally or vertically, or to enhance fonts.
Note: Off is the factory default setting.
Lighten or darken the printed output.
Notes:
•
8 is the factory default setting.
•
Selecting a smaller number can help conserve toner.
Enable a print mode preferable for files such as architectural drawings, maps,
electrical circuit diagrams, and flow charts.
Notes:
•
Off is the factory default setting.
•
You can set this option from the printer software. For Windows users, click
File > Print, and then click Properties, Preferences, Options, or Setup. For
Macintosh users, choose File > Print, and then adjust the settings from the
Print dialog and context menus.
•
To set this option using the Embedded Web Server, type the network printer
IP address in the Web browser address field.
Automatically adjust the contrast enhancement applied to images.
Note: Auto is the factory default setting.
Adjust the printed output either by lightening or darkening it. You can conserve
toner by lightening the output.
Note: 0 is the factory default setting.
Adjust the contrast of printed objects.
Note: 0 is the factory default setting.
113