Understanding the printer menus
Use
Compatibility
802.11b/g
802.11 b/g/n
Choose Network
View Signal Quality
View Security Mode
Network Card menu
Use
View Card Status
Connected
Disconnected
View Card Speed
Network Address
UAA
LAA
Job Timeout
0–255 seconds
Banner Page
Off
On
TCP/IP menu
Note: This menu is available only in network printers or printers connected to print servers.
Use
Set Hostname
IP Address
To
Specify the wireless standard for the wireless network.
Note: The 802.11b/g/n is the factory default setting.
Select an available network for the printer to use.
View the quality of the wireless connection.
View the encryption method for the wireless network.
To
View the connection status of the network card.
View the speed of an active network card.
View the network addresses.
Set the amount of time it takes for a network print job to be canceled.
Notes:
•
90 seconds is the factory default setting.
•
A setting value of 0 disables the timeout.
•
If a value of 1–9 is selected, then the setting is saved as 10.
Enable banner pages.
Note: Off is the factory default setting
To
Set the host name.
Notes:
•
This setting can be changed only from the Embedded Web Server.
•
The host name can be up to 15 characters and can be a US‑ASCII or
alphanumeric character, or hyphen.
View or change the current TCP/IP address.
Note: Manually setting the IP address sets the Enable DHCP and Enable Auto
IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on
systems that support BOOTP and RARP.
93