Understanding The Colors Of The Sleep Button And Indicator Lights; Accessing The Embedded Web Server - Lexmark MS312 User Manual

Using MS315, MS415, and MS417
Understanding the colors of the Sleep button and
indicator lights
The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status
or condition.
Indicator light
Off
Blinking green
Solid green
Blinking red
Sleep button light
Off
Solid amber
Blinking amber
Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in a slow,
pulsing pattern

Accessing the Embedded Web Server

The Embedded Web Server is the printer Web page that lets you view and remotely configure printer settings
even when you are not physically near the printer.
1
Obtain the printer IP address:
•
From the printer control panel home screen
•
From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
2
Open a Web browser, and then type the printer IP address in the address field.
3
Press Enter.
Note: If you are using a proxy server, then temporarily disable it to load the Web page correctly.
Printer status
The printer is off or in Hibernate mode.
The printer is warming up, processing data, or printing.
The printer is on, but idle.
The printer requires user intervention.
Printer status
The printer is off, idle or in Ready state.
The printer is in Sleep mode.
The printer is entering or waking from Hibernate mode.
The printer is in Hibernate mode.
31