Lexmark MS312 User Manual page 109

Understanding the printer menus
Use
Print Recovery
Auto Continue
Disabled
5–255 sec
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Jam Assist
On
Off
Print Recovery
Page Protect
Off
On
Information Sent to Lexmark
Supplies and Page Usage (Anonymous)
On
Off
Information Sent to Lexmark
Device Performance (Anonymous)
On
Off
Information Sent to Lexmark
Start Send
Stop Send
Press Sleep Button
Do nothing
Sleep
Hibernate
Press and Hold Sleep Button
Do nothing
Sleep
Hibernate
To
Let the printer automatically continue printing from certain
offline situations when these are not resolved within the
specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Note: Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
Set the printer to check for jammed paper automatically.
Note: On is the factory default setting.
Successfully print a page that may not have printed otherwise.
Notes:
•
Off is the factory default setting. This prints a partial
page when there is not enough memory to print the
whole page.
•
On sets the printer to print the entire page.
Send anonymous device usage information to Lexmark.
Note: The default value depends on the selection made
during initial setup.
Send anonymous device function and error information to
Lexmark.
Note: The default value depends on the selection made
during initial setup.
Set the time for sending anonymous information to Lexmark.
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Determine how the printer, while in idle state, reacts to a long
press of the Sleep button.
Note: Do nothing is the factory default setting.
109