Standard Usb Menu - Lexmark MS312 User Manual

Understanding the printer menus
Use
Enable IPv6
On
Off
Auto Configuration
On
Off
*
Set Hostname
*
View Address
*
View Router Address
Enable DHCPv6
On
Off
*
These settings can be changed only from the Embedded Web Server.

Standard USB menu

Use
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
To
Enable Internet Protocol Version Six (IPv6) in the printer.
IPv6 uses bigger numbers to create IP addresses.
Note: On is the factory default setting.
Specify whether or not the network adapter accepts the automatic
IPv6 address configuration entries provided by a router.
Note: On is the factory default setting.
Set the host name.
Note: The host name is limited to 15 characters, and accepts
US‑ASCII, alphanumeric characters and hyphen only.
View the current IPv6 addresses.
View the current router address.
Enable DHCPv6 in the printer.
Note: On is the factory default setting.
To
Set the printer to automatically switch to PCL emulation when a print job
received through a USB port requires it, regardless of the default printer
language.
Notes:
•
On is the factory default setting.
•
When set to Off, the printer does not examine incoming data. The printer
uses PostScript emulation if the PS SmartSwitch is set to On. It uses the
default printer language specified in the Setup menu if the PS
SmartSwitch is set to Off.
Set the printer to automatically switch to PS emulation when a print job received
through a USB port requires it, regardless of the default printer language.
Notes:
•
On is the factory default setting.
•
When set to Off, the printer does not examine incoming data. The printer
uses PCL emulation if the PCL SmartSwitch is set to On. It uses the
default printer language specified in the Setup menu if the PCL
SmartSwitch is set to Off.
95