Connecting Ms312 To A Wireless Network Using The Printer Software - Lexmark MS312 User Manual

Additional printer setup
Notes:
•
The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are accessing a proxy server, then temporarily disable it to load the Web page correctly.
4
Access the WPS settings. For more information, see the documentation that came with your access
point.
5
Enter the eight‑digit PIN, and then save the setting.

Connecting MS312 to a wireless network using the printer software

Notes:
•
Make sure that the printer is turned on.
•
Make sure that a wireless network adapter is installed in your printer and working properly. For
information, see the instruction sheet that came with the adapter.
Using the Wireless Setup Utility (Windows only)
1
Check if the printer software is already installed.
2
Use the search command on the Start menu to locate Printer Home.
3
Open Printer Home, and then click Settings > Wireless Setup Utility.
4
Follow the steps on the computer screen.
Using the Wireless Setup Assistant (Macintosh only)
The Wireless Setup Assistant lets you:
•
Configure the printer to join an existing wireless network.
•
Add a printer to an existing ad hoc network.
•
Change the wireless settings after installation.
•
Install the printer on additional network computers.
Installing the Wireless Setup Assistant
1
Go to the Lexmark support Web site at http://support.lexmark.com.
2
Download the latest Wireless Setup Assistant application.
3
Double‑click the downloaded software installer package.
4
Follow the instructions on the computer screen.
Launching the Wireless Setup Assistant
Notes:
•
Make sure the printer is turned on.
23