Lexmark MS312 User Manual page 116

Understanding the printer menus
Use
PCL Emulation Settings
Pitch
0.08–100
PCL Emulation Settings
Orientation
Portrait
Landscape
PCL Emulation Settings
Lines per Page
1–255
PCL Emulation Settings
A4 Width
198 mm
203 mm
PCL Emulation Settings
Auto CR after LF
On
Off
PCL Emulation Settings
Auto LF after CR
On
Off
To
Specify the font pitch for scalable monospaced fonts.
Notes:
•
10 is the factory default setting.
•
Pitch refers to the number of fixed‑space characters per inch (cpi).
•
Pitch can be increased or decreased in 0.01‑cpi increments.
•
For nonscalable monospaced fonts, the pitch appears on the display
but it cannot be changed.
Specify the orientation of text and graphics on the page.
Notes:
•
Portrait is the factory default setting. Portrait prints text and graphics
parallel to the short edge of the page.
•
Landscape prints text and graphics parallel to the long edge of the
page.
Specify the number of lines that print on each page.
Notes:
•
60 is the US factory default setting. 64 is the international default
setting.
•
The printer sets the amount of space between each line based on
the Lines per Page, Paper Size, and Orientation settings. Select the
Paper Size and Orientation you want before setting Lines per Page.
Set the printer to print on A4‑size paper.
Notes:
•
198 mm is the factory default setting.
•
The 203‑mm setting sets the width of the page to allow printing of
eighty 10‑pitch characters.
Specify whether the printer automatically performs a carriage return (CR)
after a line feed (LF) control command.
Note: Off is the factory default setting.
Specify whether the printer automatically performs a line feed (LF) after a
carriage return (CR) control command.
Note: Off is the factory default setting.
116