Lexmark MS312 User Manual page 157

Troubleshooting
Replace maintenance kit [80.xy]
The printer is scheduled for maintenance. For more information, go to
contact your service representative, and then report the message.
Replace unsupported cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message and continue printing.
For more information, see the instruction sheet that came with the supply.
This error can also be caused by installing a genuine Lexmark cartridge, such as a high yield cartridge, that
is not intended to be used in this product.
The following error codes indicate that a non‑genuine Lexmark toner cartridge is installed:
32.13
32.16
32.19
32.22
32.25
32.28
32.31
32.34
32.37
For more information, see
Note: If you do not have a replacement cartridge, then see the "Ordering supplies" section or go to
www.lexmark.com.
Replace unsupported imaging unit [32.xy]
Remove the imaging unit, and then install a supported one to clear the message and continue printing. For
more information, see the instruction sheet that came with the supply.
This error can also be caused by installing a genuine Lexmark imaging unit, such as a MICR unit, that is not
intended to be used in this product.
The following error codes indicate that a non‑genuine Lexmark
32.14
32.17
32.20
32.23
32.26
32.29
32.32
32.35
8
32.3
For more information, see
Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section or visit
www.lexmark.com.
"Using genuine Lexmark parts and supplies" on page
"Using genuine Lexmark parts and supplies" on page
http://support.lexmark.com
134.
imaging unit
is installed:
134.
157
or