Smtp Setup Menu - Lexmark MS312 User Manual

Understanding the printer menus
Use
View Name
View Address
Set Zone
[list of zones available on the
network]

SMTP Setup menu

Use
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Reply Address
Use SSL
Disabled
Negotiate
Required
SMTP Server Authentication
No authentication required
Login/Plain
CRAM‑MD5
Digest‑MD5
NTLM
Kerberos 5
To
Show the assigned AppleTalk name.
Note: The AppleTalk name can be changed only from the Embedded
Web Server.
Show the assigned AppleTalk address.
Note: The AppleTalk address can be changed only from the Embedded
Web Server.
Provide a list of AppleTalk zones available on the network.
Note: The default zone for the network is the factory default setting.
To
Specify SMTP server gateway and port information.
Note: 25 is the default SMTP gateway port.
Specify the amount of time in seconds before the server stops trying
to send an e‑mail.
Note: 30 seconds is the factory default setting.
Specify a reply address of up to 128 characters in the e-mail sent by
the printer.
Set the printer to use SSL for increased security when connecting to
the SMTP server.
Notes:
•
Disabled is the factory default setting.
•
When the Negotiate setting is used, the SMTP server
determines if SSL will be used.
Specify the type of user authentication required for printing
privileges.
Note: "No authentication required" is the factory default setting.
99