Lexmark MS312 User Manual page 92

Understanding the printer menus
Use
Mac Binary PS
On
Off
Auto
Standard Network Setup OR
Network [x] Setup
Reports
Network Card
TCP/IP
IPv6
Wireless
AppleTalk
Reports menu
Use To
Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP
address.
Wireless menu
Note: This menu is available only in printer models connected to a wireless network.
Use
Wi‑Fi Protected Setup (WPS)
Start Push Button Method
Start PIN Method
Enable/Disable WPS Auto‑detection
Enable
Disable
Network Mode
Infrastructure
Ad hoc
To
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
Auto is the factory default setting.
•
Off filters print jobs using the standard protocol.
•
On processes raw binary PostScript print jobs.
Display and set the printer network settings.
Note: The Wireless menu appears only when the printer is connected to a
wireless network.
To
Establish a wireless network and enable network security.
Notes:
•
Start Push Button Method connects the printer to a wireless
network by pressing buttons on both the printer and the
access point (wireless router) within a given period of time.
•
Start PIN Method connects the printer to a wireless network by
using a PIN on the printer and entering it into the wireless
settings of the access point.
Automatically detect the connection method that an access point
with WPS uses—Start Push Button Method or Start PIN Method.
Note: Disable is the factory default setting.
Specify the network mode.
Notes:
•
Ad hoc is the factory default setting. This configures wireless
connection directly between the printer and a computer.
•
Infrastructure lets the printer access a network using an access
point.
92