Ms315 And Ms415 Wi-Fi Protected Setup - Lexmark MS312 User Manual

Additional printer setup
Using the Personal Identification Number (PIN) method
1
From the printer control panel, navigate to:
> Network/Ports >
Protected Setup >
2
Copy the eight‑digit WPS PIN.
3
Open a Web browser, and then type the IP address of your access point in the address field.
Notes:
•
The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
4
Access the WPS settings. For more information, see the documentation that came with your access point.
5
Enter the eight‑digit PIN, and then save the setting.

MS315 and MS415 Wi-Fi Protected Setup

Connecting the printer to a wireless network using Wi‑Fi Protected Setup
Before connecting the printer to a wireless network, make sure that:
•
The access point (wireless router) is Wi‑Fi Protected Setup (WPS) certified or WPS‑compatible. For more
information, see the documentation that came with your access point.
•
A wireless network adapter is installed on your printer and is working properly. For more information, see
the instruction sheet that came with the adapter.
Using the Push Button Configuration Method
1
From the control panel, navigate to:
> Settings >
Wireless >
Button Method >
2
Follow the instructions on the printer display.
Using the Personal Identification Number (PIN) Method
1
From the control panel, navigate to:
> Settings >
Wireless >
>
2
Copy the eight‑digit WPS PIN.
3
Open a Web browser, and then type the IP address of your access point in the address field.
> Network [x] >
> Start PIN Method >
> Networks/Ports >
> Wireless Connection Setup >
> Networks/Ports >
> Wireless Connection Setup >
> Network [x] Setup >
> Network [x] >
> Wi‑Fi Protected Setup >
> Network [x] >
> Wi‑Fi Protected Setup >
> Wireless >
> Network [x] Setup >
> Start Push
> Network [x] Setup >
> Start PIN Method
22
> Wi‑Fi
>
>