Lexmark MS312 User Manual page 105

Understanding the printer menus
Use
Print Recovery
Jam Assist
On
Off
Print Recovery
Page Protect
Off
On
Press Sleep Button
Do nothing
Sleep
Hibernate
Press and Hold Sleep Button
Do nothing
Sleep
Hibernate
Factory Defaults
Do Not Restore
Restore Now
Custom Home Message
Off
IP Address
Hostname
Contact Name
Location
Zero Configuration Name
Custom Text 1
To
Set the printer to automatically check for jammed paper.
Notes:
•
On is the factory default setting. This sets the printer to
automatically dump blank pages or partially printed
pages to the standard bin after a jammed page has been
cleared.
•
Off requires the user to remove all pages from all
possible jam locations.
Successfully print a page that may not have printed otherwise.
Notes:
•
Off is the factory default setting. This prints a partial
page when there is not enough memory to print the
whole page.
•
On sets the printer to process the whole page so that
the entire page prints.
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Determine how the printer, while in idle state, reacts to a long
press of the Sleep button.
Note: Do nothing is the factory default setting.
Use the printer factory default settings except the
Network/Ports menu settings.
Notes:
•
Do Not Restore is the factory default setting.
•
Restore Now deletes all downloads stored in RAM.
Downloads stored in the flash memory are not affected.
Select a custom home message that appears as an alternating
display of the printer status.
Note: Off is the factory default setting.
105