Connecting The Printer To A Wireless Network Using The Embedded Web Server; Verifying Printer Setup; Ms312 And Ms317 Printing Menu Settings And Network Setup Pages - Lexmark MS312 User Manual

Additional printer setup
•
Make sure a wireless network adapter is installed in your printer and is working properly.
1
From the Finder, navigate to:
Applications > select your printer folder
2
Double‑click Wireless Setup Assistant, and then follow the instructions on the computer screen.
Note: If you encounter problems while running the application, then click
Connecting the printer to a wireless network using the
Embedded Web Server
Before you begin, make sure that:
•
Your printer is connected temporarily to an Ethernet network.
•
A wireless network adapter is installed in your printer and working properly. For more information, see the
instruction sheet that came with your wireless network adapter.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer control panel. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Network/Ports > Wireless.
3
Modify the settings to match the settings of your access point (wireless router).
Note: Make sure to enter the correct SSID.
4
Click Submit.
5
Turn off the printer, and then disconnect the Ethernet cable. Then wait for at least five seconds, and then
turn the printer back on.
6
To verify if your printer is connected to the network, print a network setup page. Then in the Network Card [x]
section, see if the status is Connected.

Verifying printer setup

MS312 and MS317 printing menu settings and network setup pages

Printing a menu settings page
Print a menu settings page to review the current menu settings and to verify if the printer options are installed
correctly.
?
.
24