Job Menu; Quality Menu; Setup Menu - Lexmark E350d Menus And Messages Manual

Job Menu

Menu selection Purpose
Reset Printer Clears current print jobs

Quality Menu

Use this menu selection to change settings that affect print quality and save toner.
Menu selection Purpose
Print Resolution Specifies the printed output resolution
Toner Darkness Lightens or darkens printed output and
conserves toner
Small Font Enh. Enhances the quality of small fonts

Setup Menu

Use this menu selection to configure a variety of printer features.
Menu selection Purpose
Eco-Mode The printer minimizes waste (toner,
paper, energy) while maintaining
acceptable print quality.
Quiet Mode The printer operates quietly by printing
output at a slower speed.
Using printer menus
Values
No value for this. Pressing
this item, the printer will reset and return to Ready.
Values
300 dpi
600 dpi
1200 Image Q
2400 Image Q*
1–10
Off*
Fonts Only
Fonts/Images
Values
Off*
Energy
Energy/Paper
Off*
On
16
initiates the reset cycle. After selecting
8* is the default setting.
Select a lower number to lighten the printed
output or save toner.
No changes in operation are made.
The following options are changed:
• Duplex is turned off.
• The control panel's power indicator LED
and backlight remain off.
• Ready mode is disabled.
Same options as Energy option, except
Duplex is turned on.
No changes in operation are made.
The following options are changed:
• The control panel's power indicator LED
remains illuminated when in Ready state
and blinks when in Busy state
• All print jobs print at half speed.
• Fuser standby mode is enabled.
Note: The engine prints at half speed in
all resolutions.