Table of Contents
Advertisement
Mounting the document support
for the multiple document feeder
With the rounded part of the guide as the top
edge, insert the document support in the slot on
the rear of the multiple document feeder so that
it slides completely into the casing.
Mounting the document support
for the single document feeder
With the adjustable margin guide to the front left,
insert the document support in the front of the
multiple document feeder so that it sits in the
grooves and forms a second document insertion
channel for single documents.
Installation Guide
Mounting the document output
tray
With the flat end towards the printer and the lip at
the opposite end facing upwards, insert the
document output tray under the front of the
printer, making sure the holes on the tray arms fit
on to the notches on the printer base.
The tray has an adjustable centre panel which
should be extended according to the document
format you are using (standard format sizes A4,
Letter and Legal are marked on the panel).
3
Advertisement
Table of Contents
