Compatible Interfaces; Ethernet Interface; Usb Interface; Connection Diagram - Olivetti D-color MF 250 Plus Operating Instructions Manual

Overview of printer functions
2.2.2

Compatible interfaces

The following interfaces can be used to connect this printing system to a computer.

Ethernet interface

Select to use this printing system via a network connection.
Supports 10Base-T, 100Base-TX, and 1000Base-T standards. In addition, the Ethernet interface supports
the TCP/IP (LDP/LPR, IPP, SMB), IPX/SPX (NetWare), and AppleTalk (EtherTalk) protocols.

USB interface

Select to use this printing system via a USB connection.
The USB interface can be connected to a computer running Windows. A USB cable is required for
connection. Use a type A (4 pin, male) or type B (4 pin, male) USB cable. A USB cable measuring three meters
or less is recommended.

Connection diagram

The printer cables are connected to each port on this machine.
Machine (rear view)
d-Color MF350/250/201Plus
Ethernet port (1000Base-T/100Base-TX/10Base-T)
USB port
2
2-7