Table of Contents
Advertisement
Chapter 5 Web GUI Setup and Monitoring
Configuring Lock Level Settings
1
From the user interface of the D9854/D9854-I, choose System Settings > Lock
Level Settings. The Lock Level Settings page is displayed.
2
Click Change Lock Level and the Change Lock Level dialog box is displayed.
3
From the Lock Level drop-down list, choose the lock level which restricts access
and prevents unauthorized changes to the receiver settings (0, 1, 2, or 3). The
default setting is 0.
Note: For details on the lock levels, see Factory Default Settings and Lock Levels
(on page 390).
4
In the Enter the Password to change the lock level field, enter the password to
change the lock level. Depending on the unit, the default password is 1234. For
more information on the default password, contact Cisco customer support.
5
Click Yes.
294
Advertisement
Table of Contents
