Configuring The Ip Input - Cisco D9854 Installation And Configuration Manual

Parameter
ASI Transport
ASI Packet Size (bytes)
Acquisition State
TS ID

Configuring the IP Input

Note: This feature is for D9854-I only.
1 From the user interface of the D9854-I, choose Input > Input Setup. The Input
Setup page is displayed.
2 Click the IP tab.
Description
Indicates the current transport synchronization status (Error,
Ok, or N/A).
Indicates the packet size (in bytes) for the ASI input (188, 204,
or N/A).
Displays Full if the ASI and PSI tables have all been found.
Otherwise, it will display Degraded if there are missing tables
or None if no ASI or PSI tables have been found.
The Transport ID (in the range from 1 to 65535).
Setting up Input Information
171