Table of Contents
Advertisement
Setting up Cue Tone Test
1
From the user interface of the D9854/D9854-I, choose Audio & Video > Cueing
> Cue Tone Test. The Cue Tone Test page is displayed.
2
In the Test Tones field, specify the three digit tone sequence. You can enter a
value between 000 and 999.
3
From the Sequence Mode drop-down list, choose the tone sequence mode. The
following describes the available options:
* - Start tone only
-
# - End tone only
-
*/# - Start and end tones. The end tone is signaled after waiting the time
-
specified in Delay(sec).
4
Click Apply.
Setting up Audio and Video Information
219
Advertisement
Table of Contents
