Chapter 5 Web GUI Setup and Monitoring
Configuring Lock Level Settings
1
From the user interface of the D9858, choose System Settings > Lock Level
Settings. The Lock Level Settings page is displayed.
2
Click Change Lock Level and the Lock Level Setting dialog box is displayed.
3
From the Lock Level drop-down list, choose the lock level that restricts access
and prevents unauthorized changes to the receiver settings (0, 1, 2, or 3). The
default setting is 0.
Note: For details on the four lock levels, see D9858 Transcoder Lock Levels.
4
In the Enter the Password to change the Lock Level field, enter the password to
change the lock level. Depending on the unit, the default password is 1234. For
more information on the default password, contact Cisco customer support.
5
Click OK.
260