Table of Contents
Advertisement
CI
Menu Item
PE
Decrypt
CI Slot
COMP only
Description
Select the Program Entry (PE) to
configure the decryption settings.
Determines whether to decrypt the
channel or to specify the specific
components to decrypt.
Select the CAM slot to use for
decryption.
If any program entries have selected Comp for the Decrypt
parameter, you can customize the PID or stream type to decrypt the
program.
To Add a Record, press the ADV button, select Insert and define the
appropriate parameters.
To delete an existing record, select Delete and confirm your deletion.
There are three different methods in setting a customized record:
PID - Set Mode to PID and enter PID number.
Stream Type - Set Mode to STREAM, select a Stream type (audio,
video, subtitle, ttx, or user) and enter Inst (instance) of the stream
type. There is an additional configuration if you select user as the
Stream type (see below).
Stream Type: User - Set Mode to STREAM, Stream type to USER,
manually enter the stream code in Type, and then the Inst (instance)
of the stream type.
Parameters
PE1 to PE16
ON (default) - Decrypts the
entire program entry.
OFF - Disables decryption for
the current program entry.
Comp - Allows specific
components to be decrypted, as
specified in the component list.
Note: If the CI Slot is set to
Auto for PE1, then Decrypt can
only be set to ON.
TOP, BOTTOM, AUTO
AUTO - PE1 only. The software
automatically assigns the slot
capable of decrypting the
stream. If CI Slot is set to
AUTO, Decrypt must be set to
ON.
TOP - The top CAM slot is used
for decryption.
BOTTOM - The bottom CAM
slot is used for decryption.
Setup Menu
109
Advertisement
Table of Contents
