Configuring Lock Level Settings - Cisco D9865 Installation And Configuration Manual

Configuring Lock Level Settings

Configuring Lock Level Settings
Proceed as follows to configure the lock level settings:
Step 1 From the user interface of the D9865, choose System Settings > Security/Accounts > Lock Level
Settings. The Lock Level Settings page is displayed.
Step 2 Click Change Lock Level and the Change Lock Level window is displayed.
Step 3 From the Lock Level drop-down list, choose the Lock Level which restricts access and prevents
unauthorized changes to the receiver settings (0, 1, 2, or 3). The default setting is 0.
Note
Step 4 In the Enter Password to change the Lock Level field, enter the lock level password. The default
password is 1234.
Step 5 Click Yes.
If the incorrect lock level or password is entered, an error message appears at the top of the page.
Cisco D9865 Satellite Receiver Software Version 2.20 Installation and Configuration Guide
5-52
For details on the four lock levels, see
Chapter 5
D9865 Satellite Receiver Lock Levels, page
Setup and Monitoring via Web GUI
C-1.
OL-31085-01