Cisco D9854 Installation And Configuration Manual page 89

Redundancy Status
Note: This feature is for D9854-I only.
Menu Item Description
Ports in Use The current output port in use.
Change Reasons Description of the reason for the last redundancy
status change.
Change Date & Displays the last date and time the redundancy
Time status changed.
MOIP Out Global Status
Menu Item Description
Engine Error Indicates a critical hardware error that may require
a unit reboot.
Stream Overflow Indicates the MPEG over IP transport stream(s)
overflow status.
Combined User Displays the combined output bit rate for all the
Rate configured streams (including FEC).
Actual Rate Port Displays the current output bit rates for Data1 and
1/2 Data2 ports (including FEC).
MOIP Out Stream Status
Menu Item Description
PE ID Displays the program entry channel.
Stream Port1/Port2 Indicates the stream status of the Management and
Data ports (D9854), or Data1 and Data2 ports
(D9854-I).
Content Overflow Indicates if the rate of the transport stream(s) to be
encapsulated (including FEC) is higher than the
configured output bit rate.
Link Overflow Indicates if the configured output bit rate
(including FEC) is close or higher than the current
Ethernet link speed for the Ethernet port used for
MPEGoIP output.
Status Menu
Parameters
None, Data1, Data2, or
Both
Link, Setup, or
Setup+Link
YYYY/MM/DD
HH:MM:SS
Parameters
Yes or No
Yes or No
0 to 206 Mbps
Parameters
1 to 16
Stopped, Suspended,
Active, or Muted
Yes or No
Yes or No
65