Configuring The Common Interface (Ci) Information - Cisco D9854 Installation And Configuration Manual

Hide thumbs Also See for D9854:

Table of Contents

Configuring the Common Interface (CI) Information

From the user interface of the D9854/D9854-I, choose Input > CI Setup. The CI

Setup page is displayed.

Choose Enable from the CI CAM QUERY Support drop-down list to query the

CAM prior to decryption to ensure that the card can be decrypted. The default is

Choose Enable from the CI CAM Auto Reset drop-down list to automatically

reset the card. The default is Disable.

From the CA List Management Type drop-down list, choose whether the

Common Interface List Management should add and delete (AddDel) individual

programs or update all (UpdateAll) the programs when the list changes.

Note: Updating all the programs will cause temporary loss of service for all the

programs when another is being modified.

Setting up Input Information