Cisco D9854 Installation And Configuration Manual page 85

Menu Item Description
C/N Margin (dB) Indicates the current Carrier-to-Noise
Margin for the received signal. The
Carrier-to-Noise margin is the actual
distance that C/N is from the noise
threshold.
PER Indicates the current PER (Packet Error
Rate) of the received signal (DVB-S2).
PVBER Indicates the PV (Post-Viterbi) BER for
the received signal (DVB-S).
LDPCBER Indicates the LDPC (Low Density Parity
Check) error rate for the received signal
(DVB-S2).
AFC (MHz) Indicates the current Automatic
Frequency Control count.
UEC Indicates the current Uncorrected Error
Count for the received signal.
CEC Indicates the current Corrected Error
Count for the received signal (DVB-S).
Clear Counts Select this option to clear the error
counters.
ASI Link Indicates whether there is a transport
stream link error.
Transport Indicates the current transport
synchronization status.
Packet Size Indicates the packet size (in bytes) for
the ASI input.
Net Name Indicates the name assigned to the
network.
NetID Indicates the Network ID of the uplink
signal the receiver is to receive when
using the selected preset. The receiver's
Network ID must match the Network
ID associated with the transmitted
signal that identifies the NIT to be used.
Note: Each network must be assigned a
unique ID (number).
TxID Indicates the Transport ID.
LNB Stat Indicates the current Low Noise Block
(LNB) connection status.
Status Menu
Parameters
Values can be displayed in the
range of -32.0 to +30.0 dB.
–
–
–
in MHz
–
–
–
Error, Ok, or N/A
Error, Ok, or N/A
188, 204, or N/A
Up to 12 alphanumeric characters.
1 to 65535
1 to 65535
No Load, Over Loaded, Over
Temperature, Short Circuit,
Disabled, Normal or N/A
61