Setting Up The Hd-Sdi Outputs (Sdi Model, With Sd/Hd-Sdi And Aes Outputs) - Cisco D9854 Installation And Configuration Manual

Setting up the HD-SDI Outputs (SDI Model, with
SD/HD-SDI and AES outputs)
The following displays the rear panel of the D9854 SDI Model and D9854 -I, with
SD/HD-SDI and AES outputs:
1 Press MENU.
2 Press
3 Press
4 Press SELECT to enter the Video menu.
5 Press SELECT to enter the PV Format menu, then use
configure the output. Press SELECT to save the changes.
6 Press down arrow to move to the SD Format menu. Press SELECT to enter the
menu and use
the changes.
7 Press MENU two times. Press
Press
use
Press
port 2. Press MENU repeatedly to return to the startup screen.

Setting up the HD-SDI Outputs (SDI Model, with SD/HD-SDI and AES outputs)

to move to the Setup menu. Press SELECT.
three times to move to the Services menu. Press SELECT.
to navigate and configure the output. Press SELECT to save
two times to enter the M1/M2 Menu. Press SELECT. Press SELECT and
to enter ASI or SDI output on port 1. Press SELECT to save changes.
to move to M2. Press SELECT and use
to move to the Outputs Menu. Press SELECT.
to enter ASI or SDI output on
to navigate and
21