Table of Contents
Advertisement
Chapter 5 Web GUI Setup and Monitoring
The following is the IP settings page for the D9854 -I:
2
In the IP Settings table, you can set the parameters for communicating with other
equipment via the Ethernet Data and Management ports for IP applications and
upgrading application software.
3
Click the control or data (data1 or data2 for D9854-I) row to edit the parameters
in the row. The following is an example:
a
In the Destination IP Addres field, enter the IPv4 destination IP address for
the interface. The address is 12 digits in length (###.###.###.###).
b Set the number of CIDR (Classless Inter-Domain Routing) bits in the network
Mask field (8 to 30).
264
Advertisement
Table of Contents
