Table of Contents
Advertisement
Chapter 4 Front Panel Operation
Menu Item
Config Type
Descramble Mode
Insert Null Packet
Auto Map
MOIP
Menu Item
Description
Name
This is the name assigned to the
transport output for ease of
reference.
118
Description
Indicates the current DPM
configuration change by a user
after changing the Output
Mode.
Select whether the output will
be descrambled if the input is
scrambled.
Select whether to insert null
packets into the output to
maintain output at a constant
bit rate.
Sets whether the DPM resolves
the channel and PID collisions
automatically on the transport
outputs. New values are
assigned to the parameters that
caused the conflict. The new
assigned values are not used by
any incoming transport or other
PE outputs. If a collision is
detected, you can review the
new changes before applying
the new changes.
Parameters
20-character string
Parameters
Edited by User - DPM changes were made.
Unmodified - No changes were made after
setting a new Output Mode.
Auto Re-Mapped - Output map changed
automatically to fix the output channel or
PID conflicts at the time of setup.
Changed by Uplink - DPM output changes
were initiated by an encoder.
Scrambled - The output channel will remain
scrambled even if the PE is authorized and
can descramble the channel.
Descrambled - Descrambles the output
channel, and passes in-the-clear channels.
The default is Descrambled.
Yes or No
Yes or No
Advertisement
Table of Contents
