Cisco D9854 Installation And Configuration Manual page 342

Chapter 6 Service and Maintenance
Alarm Message
Type
Digital Set
Program
Mapping
Digital Set
Program
Mapping
Digital Clear
Program
Mapping
Shutdown Set
Event
318
Message Cause/Remedy
Program Collision Cause: Uplink
settings may have
changed since
setting up the unit.
Please check your
DPM settings.
Remedy: Correct
the DPM settings.
Check the uplink
to find the
appropriate
system settings.
Mode-i PMT out Cause: Uplink
settings may have
of range
changed since
setting up the unit.
Please check your
DPM settings.
Remedy: Correct
the DPM settings.
Check the uplink
to find the
appropriate
system settings.
Digital Program –
Mapping - OK
DL APP REBOOT Cause: User
request requires
reboot or internal
system error.
Remedy: If it is an
internal system
error fault, clear
alarms, reset the
unit, notify Cisco
Services if the
problem persists.
Description Severity
Two source Minor
channel
numbers are
being mapped/
passed to the
same channel
number in the
output.
PMT PID to be Major
used for Mode-
i is outside of
valid MPEG
PID range.
– Major
New Major
application
downloaded,
system requires
reboot.
ID
19000
19000
19000
20000