Table of Contents
Advertisement
Chapter 4 Front Panel Operation
MOIP In Redundancy Status
Note: This feature is for D9854-I only.
Menu Item
Port In Use
Change Reason
Change Date &
Time
MOIP In IP Source Status
Note: This is for D9854-I only.
Menu Item
Data1/Data2
Source Host
Data1/Data2 MOIP
Type
MOIP In FEC Status
Note: This is for D9854-I only.
Menu Item
FEC Rate
CEC
PER
FEC Rows(D)
Present
Col(L)
Present
FEC Overhead
66
Description
The current input port in use.
Description of the reason for the last redundancy
status change.
Displays the last date and time the redundancy
status changed.
Description
When locked, this displays the source/host IP
address of the originator. If the signal is not locked,
it will display N/A.
Displays the encapsulation type of transport
stream received from the DATA1 or DATA2 port.
Description
Displays the input stream bit rate, reported by the
FEC decoder.
Indicates the current Corrected Error Count for the
received signal.
Indicates the current Packet Error Rate of the
received signal.
Displays the number of FEC rows.
Displays whether the FEC rows stream is present.
Displays the number of FEC columns
Displays whether the FEC columns stream is
present.
Displays the FEC overhead, compared to the
transport stream bit rate, in percentage.
Parameters
Data1 or Data2
None, Setup,
EthLinkStatus, TS
Status, ProgStatus
YYYY/MM/DD
HH:MM:SS
Parameters
–
UDP or RTP
Parameters
in Mbps
–
–
0 to 20
Yes or No
0 to 20
Yes or No
–
Advertisement
Table of Contents
