Table of Contents
Advertisement
4:2:0 HD MPEG-4 AVC and MPEG-2 1080i and 720p decoding
4:2:0 SD MPEG-4 AVC and MPEG-2 decoding
Aspect ratio conversion (4:3, 16:9, 14:9) with Active Format Descriptor (AFD)
control for SD programs
AFD support for down-conversion of HD programs with aspect ratio conversion
User-configurable redundant ASI, SDI, or HD-SDI outputs
SDI or HD-SDI video output with embedded audio
Closed captioning support for EIA-608 and EIA-708
MPEG and Dolby Digital audio decoding
DVB or Imitext subtitling
Four audio outputs providing either two stereo pairs or four mono channels of
balanced, audio, each with the ability to use part of the output for applications
such as second audio program (SAP), cue tones, etc.
Utility data up to 38.4 kbps using RS-232
Uplink addressable decoder output control, including vertical blanking interval
(VBI) data, audio routing, DPI, and ASI output)
Fingerprint trigger
Field upgradeable software and security
Simple Network Management Protocol (SNMP) for setup, control, and
monitoring
Front panel liquid crystal display (LCD) for control and monitoring
Web browser interface for easy setup, control, and monitoring
DVB-VBI and SCTE-127 support
CAM Interface software
Dual-tone multifrequent (DTMF) cue tone and cue trigger outputs for
advertisement insertion
Digital program mapping providing uplink control for service replacements in
blackout areas
Cisco Live Event Controller support
On Screen Display support on baseband output.
Satellite Disaster Recovery support with Cisco PowerVu Network Center uplink
control (Release 12.5 or later)
D9854/D9854-I Advanced Program Receiver
3
Advertisement
Table of Contents
