Warning
Message
Type
MPoIPI: DJ HW
Set
failure (D9854-I
only)
MPoIPI: DJ HW
Clear
failure (D9854-I
only)
MPoIPI: DJ HW
Clear
failure (D9854-I
only)
Hardware
Set
Platform
Hardware
Clear
Platform
Network ID
Set
Mismatch TS1
Message
Cause/Remedy
De-jittering
Cause: De-jittering
Engine failure
hardware failure.
(overflow,
Remedy: Software-
underflow or
controlled reset of de-
HW error)
jittering block may help.
But in most cases, the
problem is triggered by
the stream originator or
the network conditions
and cannot be fixed in
the decoder.
Need two active
–
TS streams for
proper error
detection
Fault Cleared: No
–
errors
Non-matching
Cause: A non-matching
HW Platform.
application is loaded
APP: <D9859 |
through CDT download
D9854/58/24>,
or FLASH
HW: <TMB2 |
programming.
HDR/TMB/HDR
Remedy: Replace the
2>
non-matching
application and then
reboot the IRD.
Matching
–
Hardware
Platform
detected.
Original Network
Cause: The NIT and SDT
ID in NIT and
have different original
SDT mismatched
network IDs.
Remedy: Additional
error details are
displayed in the log file.
Ensure that the uplink is
sending the same
original network ID in
SDT and in NIT.
Description
The de-jittering block
has an overflow,
underflow, or other
hardware problems.
–
–
The D9859 application
is running on the
D9854/D9858/D9824
platform or the
D9854/D9858/D9824
application is running
on the D9859
application.
–
The original network
ID in NIT does not
match the original
network ID in SDT.
ID
93104
93104
93104
94000
94000
98000
363