Table of Contents
Advertisement
Chapter 4 Front Panel Operation
Menu Item
Audio(DVBS Marg)
Cutoff
Audio(DVBS2 Marg)
Cutoff
Audio(DVBS Marg)
Restore
Audio(DVBS2 Marg)
Restore
142
Description
The following displays the Transport Default C/N Margin
Relationship
Sets the DVB-S and DVB-S2
Carrier to Noise margins, in dB,
below the audio outputs that
will be muted.
The receiver uses these
thresholds to determine when to
mute the audio in the event of a
noisy, poor, or loss of signal
condition.
Sets the DVB-S and DVB-S2
Carrier to Noise margins, in dB,
above the audio outputs that
will be restored.
The receiver uses these
thresholds to determine when to
restore the audio after it has
been muted.
The following displays the Audio Default C/N Margin Relationship
Parameters
-30.0 to 30.0
This setting must be below the
respective Restore value.
The default is 0.0.
Note: Muting Control must be set
to Enable for these settings to be
active.
-30.0 to 30.0
This setting must be below the
respective Cutoff value.
The default is 0.1.
Note: Muting Control must be set
to Enable for these settings to be
active.
Advertisement
Table of Contents
