Cisco D9854 Installation And Configuration Manual page 373

Warning Message
Type
Transport Error Set
Transport Error Clear
Transport Error Clear
Transport Error Clear
Transport Error Clear
CI Status Set
CI Status Clear
Video Format Set
Mismatch
Video Format Clear
Mismatch
Message Cause/Remedy
Transport Rate Cause: Uplink settings
Error: FPGA may have changed since
Overflow setting up the unit.
Remedy: Increase the
output rate, drop
unreferenced content in
DPM Options, and/or
drop programs not
needed for downstream
devices. Contact your
(uplink) service provider
to verify the expected bit
rate settings.
Continuity Count –
Error Cleared
Buffer Overflow –
Cleared
Transport Error –
Indicator Cleared
Transport Rate –
Error: FPGA
Overflow
Cleared
Different CA Cause: Different CA
Systems in systems are used in the
Top/Bottom
slots.
Slots
Remedy: Replace the CA
cards to use the same
CA system.
OK –
Video format –
mismatch
Video format –
match
Description
The output rate is
higher than level set
by the user.
Trap expires after 30
seconds.
Trap expires after 30
seconds.
Trap expires after 30
seconds.
Trap expires after 30
seconds.
Different CA Systems
in Top/Bottom slots.
–
Video Format
Mismatch.
–
ID
42000
42000
42000
42000
42000
42500
42500
43000
43000
349