Table of Contents
Advertisement
Chapter 4 Front Panel Operation
Menu Item
Status
Rate (Mbps)
Level (dBm)
SymRate
FEC
Modulation
Pol
IQ Tuner
IQ Status
Dnlk Freq (GHz)
L-Band
Pilot Present
C/N (dB)
60
Description
Indicates the current signal lock status
for the input.
Indicates the bit rate of the received
input signal.
Indicates the signal level of the received
signal.
Indicates the Symbol Rate of the
received signal.
Indicates the FEC (Forward Error
Correction) rate of the received signal.
Indicates the modulation type for the
received signal.
Indicates the signal polarization setting.
This setting is only applicable when
LNB Power is set to H-NIT or V-NIT.
The selected setting must match the
polarization of the transmitted signal.
Indicates the IQ (Input Signal Inversion)
for the received signal.
Indicates the input signal spectrum
inversion setting (IQ), which allows the
operator to track and select inverted
and non-inverted digital signals.
Indicates the current downlink
frequency.
Indicates the current L-Band frequency.
Indicates whether a Pilot is present for
the received signal. The Pilot is set on
the modulator for input signal
synchronization purposes.
Indicates the current Carrier-to-Noise
ratio.
Parameters
Locked - Indicates the receiver is
locked to a carrier with no valid
content.
Lock+Sig - Indicates the receiver is
locked to a carrier with valid
content.
No Lock - Indicates the receiver is
not locked to a carrier.
in Mbps
in dBm
in Msymbols/second
N/A, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
7/8, 8/9 or 9/10
N/A, QPSK, 8PSK, DVB-S, DVB-
S2 or 16QAM
Horiz (Horizontal), Vert (Vertical)
or Auto
Inv or NonInv
Auto, Opposite, or Normal
in GHz
in MHz
Yes, No, or N/A
in dB
Advertisement
Table of Contents
