Cisco D9854 Installation And Configuration Manual page 360

Chapter 6 Service and Maintenance
Alarm Message
Type
ASI Out Status Set
ASI Out Status Clear
MPoIP Status Set
336
Message Cause/Remedy
ASI Overflow. Cause: Uplink
Output Muted. settings may have
changed since
Reduce content.
setup of the unit.
Variable Bit
Rate/Statmuxed
streams may be in
use.
Remedy: Increase
the output rate,
drop unreferenced
content in DPM
Options, and/or
drop programs
not needed for
downstream
devices. Contact
your (uplink)
service provider to
verify the
expected bit rate
settings.
ASI Output –
Restored
MPEGoIP Cause: Uplink
Overflow. Output settings may have
Muted. Reduce changed since
setup of the unit.
content.
Variable Bit
Rate/Statmuxed
streams may be in
use.
Remedy: Increase
output rate, drop
unreferenced
content in DPM
Options, drop
programs not
needed for
downstream
devices. Contact
the (uplink)
service provider to
verify expected bit
rate settings.
Description Severity
Current Minor
transport rate
exceeds
configured rate
for ASI output.
Output has
been muted to
protect
downstream
devices.
– Minor
Current Minor
transport rate
exceeds
configured rate
for MPEG over
IP output.
Output has
been muted to
protect
downstream
devices.
ID
34000
34000
35000