Applicable Standards And Notices; Safety; Emc; Electromagnetic Compatibility Regulatory Requirements - Cisco D9854 Installation And Configuration Manual

Appendix C
Compliance

Applicable Standards and Notices

Safety

The D9854/D9854-I Advanced Program Receiver has been approved for safety by
the Standards Council of Canada and the OHSA (NRTL) Accredited Testing
Laboratory to the following standards:
CAN/CSA C22.2 No. 60065-03 Incl. AM1 - Audio, Video and Similar Electronic
Apparatus - Safety Requirements
UL Std. No. 60065-2007 - Audio, Video and Similar Electronic Apparatus - Safety
Requirements
Also, this product is being evaluated under the IECEE CB scheme to the following
international standard:
IEC 60065 Edition 7 (2001) included Amendment 1
For the CB report and Certificate, the product is evaluated for the country
differences outlined in CB Bulletin 110A:
National Differences: AR, AT, AU, BE, CA, CH, CS, DE, DK, ES, FI, FR, GB, GR, HU,
IE, IL, IT, MY, NL, NO, PL, PO, SE, SG, SI, SK, UA, US, YU and Group Differences.
In addition, JP, KR & CN National Differences of CB Bulletin

EMC

Electrostatic Discharge (ESD) results from the static electricity buildup on the human
body and other objects. This static discharge can degrade components and cause
failures.
Take the following precautions against electrostatic discharge.
Use an anti-static bench mat and a wrist strap or ankle strap designed to safely
ground ESD potentials through a resistive element.
Keep components in their anti-static packaging until installed.
Avoid touching electronic components when installing a module.

Electromagnetic Compatibility Regulatory Requirements

Ethernet cables should be of single-shielded or double-shielded type. Coaxial cables
should be of the double-braided shielded type. Where this equipment is subject to
USA FCC and/or Industry Canada rules, the following statements apply:
408