Terminal Emulation Connections; Using The Te Client Connection Wizard - HP Compaq t1010 Supplementary Manual

✎
The portions of this chapter that refer to serial, Com1 or Com2, or
parallel apply only to T1010 terminal models.
Use the TE Client Connection Wizard to set up a terminal
emulation connection. Terminal emulation connections use Telnet
to connect to servers.

Using the TE Client Connection Wizard

When the New Connection dialog box is open (see "Creating
New Connections"):
1. Use the drop-down scroll list to select Terminal Emulation.
2. Click on OK.
Following are the three dialog boxes of this wizard. When you are
finished configuring a connection, the new connection will be
added to the Connection Name list in the Connection Manager.
Figure 16–1 shows the first dialog box of this wizard.
Administrators Guide
Terminal Emulation
Connections
16
16–1