Passwords; Alert Tone (And Volume) - Henny Penny LOV LVG-102 Technical Manual

4-3. PASSWORDS

4-4. ALERT TONE (and volume)

Dec. 2007
The 4-digit passwords can be changed for access to Set-Up,
Usage, Level 1, Level 2, & Get Mgr.)
1. Press and hold
shows in the display, followed by ENTER CODE.
2. Enter code 1, 2, 3, 4 (first 4 product buttons). "PROD"
and "COMP" show in the displays.
3. Press button twice and "PASSWORD" shows in the
display.
4. Press right √ button and "SET UP" shows in display. The
Set up password can be changed at this time, or press
once to change the USAGE password, twice for LEVEL 1
password, 3 times for LEVEL 2 password, or 4 times for
GET MGR password. And then, follow instructions below.
5. If the password for Set Up Mode (for example) is to be
changed, press right √ button and "MODIFY? "YES NO"
shows in the display. Press right √ button to change the
4-digit password for the Set Up Mode, using the product
buttons
6. Once new password is entered, "CONFIRM PASSWORD"
shows in the display. Press √ button to confirm, or press X
to choose another password.
1. Press and hold
shows in the display, followed by "ENTER CODE".
2. Enter code 1, 2, 3, 4 (first 4 product buttons). "PROD"
and "COMP" show in the displays.
3. Press button 3 times and "ALERT TONE" shows in
the display.
4. Press right √ button and "VOLUME" shows in display,
along with volume value. Use the product buttons
10 (loudest).
5. Once volume is set, press √ button and "TONE" shows in
display, along with the tone value. Use the product buttons
6. Press X to exit Alert Tone Mode.
4-3
Model LVG-102, 103, 104
and buttons until LEVEL - 2
and buttons until "LEVEL - 2"
to set volume from 1 (softest) to
to set tone from 50 to 2000 Hz.